Door
What it is
A door in a wall. It cuts an opening in the wall and swings open or closed.
How to create it
Architecture → Door, or D. Click on a wall to place it. The door moves with its wall.
ShortcutD
Place on host
Properties
| Field | Type | Unit | Min. | Description |
|---|---|---|---|---|
| Type | select | — | — | Door type: frame, leaf and finish. |
| Level | select | — | — | Level the door sits on. |
| Width (m) | number | m | 0.4 | Width of the opening. |
| Height (m) | number | m | 0.5 | Height of the opening. |
| Offset from level (m) | number | m | — | Height of the bottom of the door above the level. |
| Position on wall (m) | number | m | 0 | Distance from the start of the wall to the door. |
| Flip swing side | yes / no | — | — | Swings the leaf to the other side. |
| Hinge at end | yes / no | — | — | Puts the hinge at the other end of the opening. |
| Open door | yes / no | — | — | Draws the leaf open, in plan and in 3D. |
Works with
Hosted by a wall. Moving the wall moves the door, and the wall gets the opening.
Where it shows
Plan: opening and swing arc. Section: hole and frame. 3D: door leaf when open. IFC: IfcDoor filling an opening.