Cabinetry
What it is
Built-in cabinets along a line: base cabinets, wall cabinets and wardrobes.
How to create it
Equipment → Cabinetry, then pick the type. Draw a line or chain; the cabinets follow it. Reverse front side flips the front.
LinePolyline
Properties
| Field | Type | Unit | Min. | Description |
|---|---|---|---|---|
| Type | select | — | — | Base cabinet, wall cabinet or wardrobe. The fields below change with the type. |
| Level | select | — | — | Level the cabinets sit on. |
| Height (m) | number | m | 0.2 | Height of the cabinet body, not counting the upper cap. |
| Depth (m) | number | m | 0.15 | Depth of the cabinets. |
| Height above floor (m) | number | m | — | Height of the bottom of the cabinets above the floor. |
| Upright spacing (m) | number | m | 0.1 | Distance between the uprights of the carcass. |
| Panel thickness (m) | number | m | 0.005 | Thickness of the carcass panels. |
| Door thickness (m) | number | m | 0.005 | Thickness of the doors. |
| Plinth height (m) | number | m | 0.02 | Height of the plinth (base cabinets and wardrobes). |
| Plinth recess (m) | number | m | 0 | How far the plinth is set back. |
| Worktop thickness (m) | number | m | 0.01 | Thickness of the worktop (base cabinets). |
| Worktop overhang (m) | number | m | 0 | How far the worktop sticks out (base cabinets). |
| Upper cap thickness (m) | number | m | 0.005 | Thickness of the cap (wall cabinets and wardrobes). |
| Upper cap overhang (m) | number | m | 0 | How far the cap sticks out (wall cabinets and wardrobes). |
| Reverse front side | yes / no | — | — | Flips the front of the cabinets to the other side. |
| Length (m) | computed | m | — | Length of the run. |
Works with
Cabinets run along a wall. Draw them against the wall they belong to.
Where it shows
Plan: footprint. 3D: solid. IFC: not part of the export list in this version.